Configure Custom Option Data for a Vendor Class
Before you begin
-
Create the vendor class.
-
Define the custom option.
About this task
Note
The switch follows inheritance and precedence rules for configured DHCP Server options. For more information, see DHCP Server.
Procedure
Example
Configure custom option data for the vendor class:
Switch:1>enable Switch:1#config t Switch:1(config)#ip dhcp-server vendor-class 20 custom-option-data 246 value 192.0.2.24 <cr>
Variable Definitions
The following table defines parameters for the ip dhcp-server vendor-class command.
Variable | Definition |
---|---|
WORD<1-255> |
Specifies the vendor class ID. |
custom-option-data WORD<224-254> |
Specifies the DHCP code that identifies the custom option. |
value WORD<0-128> |
Specifies a data value to apply to this vendor class. |